Removal And Installation

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


CAUTION:
- Use two people when removing or installing trunk lid assembly due to its heavy weight.
- Use protective tape or shop cloths to protect surrounding components from damage during removal and installation of trunk lid assembly.

REMOVAL

1.Remove trunk lid finisher (if equipped). Refer to "TRUNK LID FINISHER : Removal and Installation" Trunk Lid Finisher.





2.Disconnect the harness connectors in the trunk lid assembly (1)
and remove the harness clips (A) then pull out harness from the trunk lid assembly (1).





3.Remove the bolts (A), and remove the trunk lid assembly (1).

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
After installation, perform the trunk lid assembly adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustments.