Trunk / Liftgate Lock: Service and Repair

TRUNK LID

TRUNK LID LOCK : Removal and Installation


REMOVAL

1.Remove the trunk lid finisher (if equipped). Refer to "TRUNK LID FINISHER : Removal and Installation" Trunk Lid Finisher.





2.Remove the trunk lid lock bolts (A).
3.Disconnect the harness connector (B) and emergency release handle (2) from the trunk lid lock (1) and remove.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
After installation, perform the trunk lid assembly adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustments.