Removal And Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Partially drain engine coolant from the radiator. Refer to "Changing Engine Coolant" Service and Repair.

CAUTION:
- Perform when engine is cold.
- Do not spill coolant on the drive belt.
2.Remove engine room cover. Refer to "Removal and Installation" Removal And Installation.





3.Remove the core support cover clips (A), then remove the core support cover (1).
4.Remove front air duct. Refer to "Removal and Installation" Removal And Installation.
5.Remove air cleaner and air duct assembly. Refer to "Removal and Installation" Removal And Installation.
6.Remove battery tray and battery tray bracket. Refer to "Removal and Installation (Battery Tray)" Service and Repair.
7.Disconnect radiator hose (upper) from radiator.
8.Disconnect fan motor harness connectors.
9.Remove fan shroud and motor assembly.

INSTALLATION

Installation is in the reverse order of removal.
- After installation refill engine coolant and check for leaks. Refer to "Changing Engine Coolant" Service and Repair and
"System Inspection" Initial Inspection and Diagnostic Overview.

CAUTION:
Do not spill coolant in engine compartment. Use a shop cloth to absorb coolant.
- Cooling fans are controlled by ECM. For details, refer to "On Board Diagnosis Function" On Board Diagnosis Function.