Step Lamp

STEP LAMP

Bulb or Lens Replacement


WARNING:
Do not touch bulb while it is lit or right after being turned OFF. Burning may result.

CAUTION:
Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.





1.Release the front step lamp pawls using a suitable tool and remove.
2.Disconnect the harness connector (A) from the front step lamp (1).
3.Remove front step lamp bulb (B).
4.Install the front step lamp bulb.
5.Connect the harness connector to the front step lamp.
6.Install the front step lamp.