System Description

ILLUMINATION CONTROL SYSTEM

System Description

EXCEPT MEXICO
The illumination system is activated by the combination switch (lighting and turn signal switch) when the switch is placed in the 1st or 2nd position (or if the auto light system is activated).
The illumination system and combination meter illumination brightness is adjustable using the meter control switch (illumination control switch).
- The BCM (body control module) receives the parking lamp request signal from the combination switch (lighting and turn signal switch) to turn the lights on.
- The BCM sends the parking lamp request signal to the IPDM E/R (intelligent power distribution module engine room) via CAN communication.
- IPDM E/R receives the parking lamp request signal from the BCM to activate the tail lamp relay and provide power to the illumination system.
FOR MEXICO
The illumination system is activated by the combination switch (lighting and turn signal switch) when the switch is placed in the 1st or 2nd position (or if the auto light system is activated).
Only the combination meter illumination brightness is adjustable using the meter control switch (illumination control switch).
- The BCM (body control module) receives the parking lamp request signal from the combination switch (lighting and turn signal switch) to turn the lights on.
- The BCM sends the parking lamp request signal to the IPDM E/R (intelligent power distribution module engine room) via CAN communication.
- IPDM E/R receives the parking lamp request signal from the BCM to activate the tail lamp relay and provide power to the illumination system.

BATTERY SAVER CONTROL

When the combination switch (lighting and turn signal switch) is in the 1st or 2nd position and the ignition switch is set from ON or ACC to OFF, the battery saver control feature is activated. Under this condition, the illumination system remains on for 15 minutes unless the combination switch (lighting and turn signal switch)
position is changed. If the combination switch (lighting and turn signal switch) position is changed, then the illumination system is turned off after a 30 second delay. When the combination switch (lighting and turn signal switch) is turned from OFF to 1st or 2nd position (or if auto light system is activated) after illumination system has been turned off by the battery saver control, the illumination lights illuminate again.