Bulb Replacement - Halogen

FRONT COMBINATION LAMP

Bulb Replacement - Halogen


WARNING:
Do not touch bulb by hand while it is lit or right after being turned off. Burning may result.

CAUTION:
- Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
- Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.

HEADLAMP HIGH BEAM

Removal
1.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
2.Rotate the headlamp high beam socket counterclockwise and remove from front combination lamp.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.

HEADLAMP LOW BEAM HALOGEN

Removal
1.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
2.Rotate the headlamp low beam sockets counterclockwise and remove from front combination lamp.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.

SIDE MARKER LAMP

Removal
1.Position the front fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.
2.Rotate the side marker lamp bulb socket counterclockwise and remove.
3.Remove the side marker bulb from the front combination lamp.
Installation
Installation is in the reverse order of removal.

CAUTION:
After installing, be sure to install the bulb socket securely to ensure watertightness.