Disassembly And Assembly - Halogen

FRONT COMBINATION LAMP

Disassembly and Assembly - Halogen


FRONT COMBINATION LAMP - HALOGEN


WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.

CAUTION:
- Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
- Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Disassembly
1.Remove front combination lamp. Refer to "Removal and Installation Halogen" Removal And Installation - Halogen.
2.Rotate the halogen lamp bulb (low beam) counterclockwise and remove.
3.Rotate the halogen lamp bulb (high beam) counterclockwise and remove.
4.Rotate the side marker bulb socket counterclockwise and remove.
5.Remove the side marker bulb from the side marker bulb socket.
Assembly
Assembly is in the reverse order of disassembly.

CAUTION:
After installing, be sure to install the bulb sockets securely to ensure watertightness.