Disassembly And Assembly - Xenon

FRONT COMBINATION LAMP

Disassembly and Assembly - Xenon


FRONT COMBINATION LAMP - XENON


WARNING:
Do not touch bulb while it is lit or right after being turned off. Burning may result.

CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- HID control unit and xenon bulb socket cannot be disassembled.
- Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb.
- Do not leave the bulb out of the lamp reflector for a long time because dust, moisture, smoke, etc.
may affect the performance of the lamp.
Disassembly
1.Remove front combination lamp. Refer to "Removal and Installation Xenon" Removal And Installation - Xenon.
2.Rotate plastic cover counterclockwise and remove from the front combination lamp.
3.Rotate xenon bulb socket counterclockwise and remove.
4.Remove retaining spring and remove xenon bulb from the front combination lamp.
5.Rotate the halogen lamp bulb (high beam) counterclockwise and remove.
6.Rotate the side marker bulb socket counterclockwise and remove.
7.Remove the side marker lamp bulb from the side marker bulb socket.
Assembly
Assembly is in the reverse order of disassembly.

CAUTION:
- After installing the xenon bulb, be sure to install plastic cover securely to ensure watertightness.
- After installing, be sure to install the bulb sockets securely to ensure watertightness.