Removal And Installation

ACCELERATOR CONTROL SYSTEM

Removal and Installation


REMOVAL

1.Disconnect the harness connector from accelerator pedal assembly.
2.Remove the two accelerator pedal bolts.
3.Remove the accelerator pedal assembly.

CAUTION:
- Do not disassemble the accelerator pedal assembly.
- Do not drop or impact the accelerator pedal assembly.
- Do not expose the accelerator pedal assembly to water.

INSTALLATION

Installation is in the reverse order of removal.





- Check the accelerator pedal moves smooth within the specified range.
Accelerator pedal stroke (A): Refer to {LINK_TO:0000000007991818}, "Accelerator Control".

CAUTION:
- Whenever the harness connector of the accelerator pedal position sensor is disconnected, perform the "Accelerator pedal released position learning". Refer to "Work Procedure" Work Procedure (QR25DE) or
"Work Procedure" (VQ35DE).
- The accelerator pedal should return smoothly to the fully raised position.