Valve Timing Control Cover

VALVE TIMING CONTROL

Valve Timing Control Cover


REMOVAL

1.Remove the intake valve timing intermediate lock control solenoid valve, intake valve timing control solenoid valve, exhaust valve timing control solenoid valve. Refer to {LINK_TO_MANY:0000000008494583}{LINK_TO_MANY:0000000007989889}, "Intake Valve Timing Intermediate
Lock Control Solenoid Valve, Intake Valve Timing Control Solenoid Valve, and Exhaust Valve Timing Control Solenoid Valve".
2.Remove harness grounds and retainers from the top if the engine mount bracket.





3.Loosen the valve timing control cover bolts in the reverse order shown.
a.Remove the valve timing control cover bolts.





b.Remove the valve timing control cover by cutting the liquid gasket using Tool (A).
Tool number: KV10111100 (J-37228)
NOTE:





Do not loosen screws (A) on the back of the valve timing control cover.

INSTALLATION

1.Install valve timing control cover with the following procedure.
a.Install intake valve timing intermediate lock control solenoid valve, intake valve timing control solenoid valve and exhaust valve timing control solenoid valve to valve timing control cover.
b.Install O-ring to front cover side.

CAUTION:
Do not reuse O-ring.





c.Apply liquid gasket to the positions shown. Refer to "Recommended Chemical Products and Sealants" Recommended Chemical Products And Sealants.
Diameter (A): 3.4 - 4.4 mm (0.134 - 0.173 in)





d.Install valve timing control cover.
- Tighten the bolts to specification in the numerical order shown.