LH Front Only Anti-Pinch

REAR POWER WINDOW SWITCH

Removal and Installation


REMOVAL

1.Release the pawls using a suitable tool and lift the rear power window switch and finisher as an assembly by starting at the rear, then pull upward and remove
2.Disconnect the harness connector from the rear power window switch.





3.Release the pawl (one on each side) using a suitable tool, then separate the rear power window switch (1) from the rear power switch finisher (2).
Broken circle indicates : Pawl

CAUTION:
Do not bend back the pawls on the switch finisher too far or breakage may occur.

INSTALLATION

Installation is in the reverse order of removal.