Intake Manifold

INTAKE MANIFOLD

If studs were removed, install them and tighten to specification.

Studs : 9.4 Nm (0.96 kg-m, 83 in-lb)






Tighten in numerical order as shown.

CAUTION: After tightening the five bolts in the order shown, the 1, 6 position designates that the first bolt tightened is to be retightened to specification.

Bolts 1, 2, 3, 4, 5, 6: 25.0 Nm (2.6 kg-m, 18 ft-lb)
Nuts 4, 5: 25.0 Nm (2.6 kg-m, 18 ft-lb)
Bolt 7: 45.0 Nm (4.6 kg-m, 33 ft-lb)