Auxiliary Power Outlet: Service and Repair

POWER SOCKET

Removal and Installation


FRONT POWER SOCKET OR FRONT CONSOLE POWER SOCKET

NOTE:
If unable to use the Tool because of the power socket location or access to the harness connector, then removal of interior components may be required. Refer to "Removal and Installation" Removal And Installation (Front Power
Socket) or "Removal and Installation" Removal And Installation (Front Console Power Socket).
Removal
1.Remove the fuse for the power socket.





2.Insert one end of the Tool (A) into one of the square holes inside the power socket.
Tool number:- (J-42059)
3.Lift up the handle of the Tool until the other side snaps into the other square hole in the power socket.
4.Pull the power socket straight out with the Tool.





5.Disconnect harness connector from the power socket.
6.Remove ring from power socket finisher while pressing the pawls.
Installation





Installation is in the reverse order of removal.
NOTE:
Make sure to align the tab with the square notched area during installation.