Front Door Window Glass: Adjustments

FRONT DOOR GLASS

Inspection and Adjustment


SYSTEM INITIALIZATION (IF NECESSARY)

- If any of the following occur, system initialization must be performed.
- Electric power supply to power window switch or motor is interrupted by blown fuse or disconnecting battery cable, etc.
- Removal and installation of the regulator assembly.
- Removal and installation of the motor from the regulator assembly.
- Removal and installation of the harness connector of the power window switch.
- Operation of the regulator assembly as a unit.
- Removal and installation of the door glass.
- Removal and installation of the door glass run.
- Window is partly opened and or closed multiple times with out being fully closed.
- To perform system initialization, refer to the following:
- For LH ONLY ANTI-PINCH, refer to {LINK_TO_MANY:0000000007987622}{LINK_TO_MANY:0000000007987623}{LINK_TO_MANY:0000000007987624}{LINK_TO_MANY:0000000007987625}, "ADDITIONAL SERVICE WHEN REMOVING BATTERY
NEGATIVE TERMINAL : Special Repair Requirement".
- For LH&RH FRONT ANTI-PINCH, refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" LH & RH Front Anti-Pinch.

INSPECT THE FUNCTION OF THE ANTI-PINCH SYSTEM.

To inspect the anti-pinch system, refer to the following:
- For LH ONLY ANTI-PINCH, refer to {LINK_TO_MANY:0000000007987622}{LINK_TO_MANY:0000000007987623}{LINK_TO_MANY:0000000007987624}{LINK_TO_MANY:0000000007987625}, "ADDITIONAL SERVICE WHEN REMOVING BATTERY
NEGATIVE TERMINAL : Special Repair Requirement".
- For LH&RH FRONT ANTI-PINCH, refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" LH & RH Front Anti-Pinch.