Front Wiper Motor Ground Circuit

FRONT WIPER MOTOR GROUND CIRCUIT

Diagnosis Procedure

Regarding Wiring Diagram information, refer to {LINK_TO:0000000007986997}, "Wiring Diagram - With Rear View Camera Washer
Control System".

1. CHECK FRONT WIPER MOTOR (GND) OPEN CIRCUIT

1.Turn the ignition switch OFF.
2.Disconnect front wiper motor.
3.Check continuity between front wiper motor harness connector E25 and ground.





Is the inspection result normal?
YES- Front wiper motor ground circuit is normal.
NO- Repair or replace the harness or connectors.