Without Navigation

USB CONNECTOR

Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Without Navigation.

1. CHECK USB INTERFACE HARNESS CONTINUITY

1.Turn ignition switch OFF.
2.Disconnect AV control unit connector M134 and USB interface connector M132.
3.Check continuity between AV control unit connector M134 and USB interface connector M132.





4.Check continuity between AV control unit connector M134 and ground.





Is the inspection result normal?
YES- Replace the USB interface. Refer to "Removal and Installation" Without Navigation.
NO- Repair or replace harness or connectors.