Glass Lid

GLASS LID

Removal and Installation


REMOVAL


CAUTION:
- After installing glass lid, check gap/height adjustments and operation to make sure there is no malfunction.
- Handle glass lid with care to prevent damage.





1.Open sunshade (1), then close glass lid.
White arrow indicates : Front

2.Remove glass lid bolts (A) on the LH and RH sides.
3.Remove glass lid from moonroof unit assembly.
4.

INSTALLATION

1.Position glass lid to moonroof unit assembly.
2.Tighten glass lid bolts.
NOTE:
First tighten left front bolt, then right rear bolt on moonroof lid assembly to prevent uneven torque while tightening remaining bolts.
3.After installation, check moonroof operation and glass lid alignment. Refer to "Inspection" Inspection.