With LH And RH Anti-Pinch

KEY CYLINDER SWITCH

Diagnosis Procedure (With LH and RH Anti-Pinch)

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL

1.Turn ignition switch ON.
2.Check voltage between main power window and door lock/unlock switch connector and ground.





Is the inspection result normal?
YES- Replace main power window and door lock/unlock switch. Refer to "Removal and Installation" LH & RH Front Anti-Pinch.
NO- GO TO 2

2. CHECK DOOR KEY CYLINDER SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect main power window and door lock/unlock switch connector and front door lock assembly LH
connector.
3.Check continuity between main power window and door lock/unlock switch connector and front door lock assembly LH connector.





4.Check continuity between main power window and door lock/unlock switch connector and ground.





Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace harness.

3. CHECK DOOR KEY CYLINDER SWITCH GROUND CIRCUIT

Check continuity between front door lock assembly LH connector and ground.





Is the inspection result normal?
YES- GO TO 4
NO- Repair or replace harness.

4. CHECK DOOR KEY CYLINDER SWITCH

Check door key cylinder switch.
Refer to "Component Inspection" Component Inspection.
Is the inspection result normal?
YES- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.
NO- Replace front door lock assembly LH. Refer to "FRONT DOOR LOCK : Removal and Installation" Removal And Installation.