Disassembly And Assembly

OIL PUMP

Disassembly and Assembly


DISASSEMBLY

1.Remove the oil pump cover.
2.Remove inner rotor and outer rotor from oil pump housing.

CAUTION:
The outer rotor has directional vanes in relation to the rotation of the oil pump shaft. Note the outer rotor vane direction for assembly.
3.Remove oil strainer from oil pump housing.
4.After removing regulator plug, remove spring and regulator valve.

Assembly


CAUTION:
- Do not reuse O-ring.
- Before assembly apply new engine oil to the parts as specified.





Assembly is in the reverse order of disassembly.
- Assemble the outer rotor in the correct vane orientation to rotation as noted during disassembly and the inner rotor with the groove on the oil pump cover side.