Washer Fluid Level Switch Circuit

WASHER FLUID LEVEL SWITCH CIRCUIT

Description

Transmits the washer fluid level switch signal to the combination meter.


Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" [1][2]Electrical Diagrams.

1. CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT

1.Turn ignition switch OFF.
2.Disconnect combination meter harness connector M26 and washer fluid level switch harness connector
E208.
3.Check continuity between combination meter harness connector M26 and washer fluid level switch harness connector E208.





4.Check continuity between combination meter harness connector and ground.





Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness or connectors.

2. CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT

Check continuity between washer fluid level switch connector and ground.





Is the inspection result normal?
YES- Inspection End.
NO- Repair or replace harness or connectors.


Component Inspection


1. CHECK WASHER FLUID LEVEL SWITCH

1.Turn ignition switch OFF.
2.Disconnect washer fluid level switch connector.
3.Check washer fluid level switch.





Is the inspection result normal?
YES- Inspection End.
NO- Replace washer fluid level switch. Refer to "Removal and Installation" Removal And Installation.