Fog/Driving Lamp: Service and Repair

FRONT FOG LAMP

Removal and Installation


REMOVAL

1.Remove the front fender protector side cover.
2.Position the fender protector aside. Refer to "FENDER PROTECTOR : Removal and Installation" Removal And Installation.





3.Disconnect the harness connector (B) from the front fog lamp (1).
4.Remove the screws (A) and the front fog lamp (1).

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
After installing, perform fog lamp aiming adjustment. Refer to "Aiming Adjustment" Adjustments.