Remote Start Sys. - Ign. Button Does Not Respond To Input

Classification:
EL12-085

Reference:
NTB13-023

Date:
March 13, 2013

2013 ALTIMA AND PATHFINDER; IGNITION BUTTON WILL NOT
RESPOND DURING REMOTE START USE

APPLIED VEHICLE VIN AND DATE:
2013 Altima (L33)
Built before 1N4AL3AP(*)DC 150330, Oct 01, 2012
Built before 1N4BL3AP(*)DN 454258, Oct 01, 2012
2013 Pathfinder (R52)
Built before 5N1AR2MM(*)DC 602921, Oct 01, 2012

IF YOUR CONFIRM:

During or after a "Remote Engine Start (RES) operation:

^ The ignition switch will not respond to any input.

And

^ ELEC IGN relay and IPDM IGN relay may turn ON and OFF continuously, while ACC remains OFF.

^ Brake and charge lamps may blink continuously.

^ DTCs P2103 and U1000 may be present.

ACTION:

^ Replace Body Control Module (BCM) with Part listed in PARTS INFORMATION.

IMPORTANT:
BEFORE removing the BCM refer in the appropriate ESM to M: ELECTRICAL & POWER CONTROL, BCS - Body Control System, BCM BASIC INSPECTION to begin the procedure for BCM Replacement.





PARTS INFORMATION

Altima

CLAIMS INFORMATION





Submit a Primary Part (PFP) type line claim using the claims coding:

Pathfinder

CLAIMS INFORMATION





Submit a Primary Part (PFP) type line claim using the claims coding:





Disclaimer