Information Display (ASCD)
INFORMATION DISPLAY (ASCD)
Component Function Check
1. CHECK INFORMATION DISPLAY
1.Start engine.
2.Press MAIN switch on ASCD steering switch.
3.Drive the vehicle at more than 40 km/h (25 MPH).
CAUTION:
Always drive vehicle at a safe speed.
4.Press SET/COAST switch.
5.Check that the reading of the speedometer shows the same value as the set speed indicated in the information display while driving the vehicle on a flat road.
Is the inspection result normal?
YES- INSPECTION END
NO- Proceed to "Diagnosis Procedure" .
Diagnosis Procedure
1. CHECK DTC
Check that DTC UXXXX, P0500 or P1574 is not displayed.
Is the inspection result normal?
YES- GO TO 2.
NO-1- Perform trouble diagnosis for DTC UXXXX.
NO-2- Perform trouble diagnosis for DTC P0500. Refer to "DTC Logic" P0500.
NO-3- Perform trouble diagnosis for DTC P1574. Refer to "DTC Logic" P1574.
2. CHECK DTC WITH COMBINATION METER
Refer to "CONSULT Function (METER/M&A)" CONSULT Function (Meter/M&A).
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis for DTC indicated.
3. CHECK INTERMITTENT INCIDENT
Refer to "Intermittent Incident" Intermittent Incident.
Is the inspection result normal?
YES- Replace combination meter. Refer to "Removal and Installation" Service and Repair.
NO- Repair or replace.