Trunk Lid Opener Switch
TRUNK LID OPENER SWITCH
Removal and Installation
REMOVAL
1.Remove the instrument lower panel LH. Refer to "Removal and Installation" Instrument Lower Panel LH.
2.Remove screws (A) that retain the upper switch carrier (1) to the instrument lower panel LH (2).
3.Release upper tab (B) and lower tab (C) using a suitable tool (A), then remove the trunk open switch (1) from the upper switch carrier.
(1) Trunk opener switch
(2) VDC switch
(3) Heated steering wheel switch (if equipped)
(4) Blank
INSTALLATION
Installation is in the reverse order of removal.