LH Front Only Anti-Pinch

POWER SUPPLY AND GROUND CIRCUIT

POWER WINDOW MAIN SWITCH : Special Repair Requirement


1. PERFORM INITIALIZATION PROCEDURE

Perform initialization procedure.
Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" LH Front Only Anti-Pinch.
Is the inspection result normal?
YES- GO TO 2.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.

2. CHECK ANTI-PINCH OPERATION

Check anti-pinch operation.
Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" LH Front Only Anti-Pinch.
Is the inspection result normal?
YES- Inspection End.
NO- Refer to "POWER WINDOW MAIN SWITCH : Component Function Check" LH Front Only Anti-Pinch.