C1130

C1130 ENGINE SIGNAL

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch ON.
2.Perform self diagnostic result.
Is DTC C1130 detected?
YES- Proceed to diagnosis procedure. Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. CHECK SELF DIAGNOSTIC RESULT FOR ENGINE SYSTEM

With CONSULT.
Perform self diagnostic result. Refer to "CONSULT Function" CONSULT Function.
Are any ECM DTCs detected?
YES- Refer to "DTC Index" Testing and Inspection.
NO- GO TO 2.

2. CHECK SELF DIAGNOSTIC RESULT FOR ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

With CONSULT.
1.Perform self diagnostic result and erase DTCs.
2.Turn ignition switch OFF.
3.Start engine and drive vehicle for a short period of time.
4.Check that malfunction indicator lamp (MIL) turns OFF.
5.Stop vehicle and perform self diagnostic result.
Is DTC C1130 detected?
YES- Replace ABS actuator and electric unit (control unit). Refer to "Removal and Installation" Removal And Installation.
NO- Check pin terminals and connection of connectors for abnormal conditions. Repair or replace malfunctioning components.