C1142

C1142 PRESS SENSOR

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. CHECK SELF DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch ON.
2.Perform self diagnostic result.
Is DTC C1142 detected?
YES- Proceed to diagnosis procedure. Refer to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. CHECK STOP LAMP SWITCH SYSTEM

Check stop lamp switch system. Refer to "Diagnosis Procedure" C1116.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace malfunctioning components.

2. CHECK BRAKE FLUID LEAKAGE

Check brake fluid leakage. Refer to "Inspection" Removal and Replacement.
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace malfunctioning components.

3. CHECK BRAKE PEDAL

Check brake pedal. Refer to "Inspection and Adjustment" Adjustments.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace malfunctioning components.

4. CHECK SELF DIAGNOSTIC RESULT

With CONSULT.
1.Turn ignition switch ON.
2.Perform self diagnostic result.
3.Erase DTCs.
4.Start engine and drive vehicle for a short period of time.
5.Turn ignition switch ON.
6.Perform self diagnostic result.
Is DTC C1142 detected?
YES- Replace ABS actuator and electric unit (control unit). Refer to "Removal and Installation" Removal And Installation.
NO- Inspection End.