C1729

DTC Logic


DTC DETECTION LOGIC







DTC CONFIRMATION PROCEDURE


1. PERFORM SELF DIAGNOSTIC RESULT

With CONSULT
1.Drive for 3 minutes at a speed of 40 km/h (25 MPH) or more without stopping.
2.Stop the vehicle.
3.Perform "SELF DIAGNOSTIC RESULT".
Is DTC "C1729" detected?
YES- Proceed to "Diagnosis Procedure" .
NO- Inspection End.


Diagnosis Procedure


1. PERFORM COMBINATION METER SELF DIAGNOSTIC RESULT

With CONSULT
Perform "SELF DIAGNOSTIC RESULT" for "METER/M&A". Refer to "CONSULT Function" Type A (type A)
or "CONSULT Function" Type B (type B).
Are any DTCs detected?
YES- Refer to "DTC Index" Testing and Inspection (type A) or "DTC Index" Testing and Inspection (type B).
NO- GO TO 2.

2. CHECK BCM INPUT/OUTPUT SIGNAL

Check the BCM input/output signal values. Refer to "Reference Value" With Intelligent Key System or {LINK_TO:0000000008901368}, "Reference
Value".
Is the inspection result normal?
YES- Check pin terminal and connection of each harness connector for malfunctioning conditions.
NO- Replace the BCM. Refer to "Removal and Installation" Service and Repair or "Removal and Installation" Service and Repair.