Intelligent Key

INTELLIGENT KEY

Component Function Check

NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
- Check Intelligent Key relative signal strength.
- Confirm vehicle Intelligent Key antenna signal strength.

1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "RKE OPE COUN1" in "DATA MONITOR" mode.
3.Check that the function operates normally according to the following conditions.





Is the inspection result normal?
YES- Intelligent Key is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure

NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II
User Guide for additional information.
- Check Intelligent Key relative signal strength.
- Confirm vehicle Intelligent Key antenna signal strength.

1. CHECK INTELLIGENT KEY BATTERY






Check by connecting a resistance (approximately 300 ohms) so that the current value becomes about 10 mA. Refer to "Removal and Installation" Intelligent Key Battery.
Standard: Approx. 2.5 - 3.0V
Is the measurement value within the specification?
YES- Replace Intelligent Key.
NO- Replace Intelligent Key battery.