With Intelligent Key System

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


CAUTION:
- Use two people when removing or installing trunk lid assembly due to its heavy weight.
- Use protective tape or shop cloths to protect surrounding components from damage during removal and installation of trunk lid assembly.

REMOVAL

1.Remove trunk lid finisher (if equipped). Refer to "Removal and Installation" Removal And Installation.
2.Disconnect the harness connector from the license plate lamp. Refer to "Removal and Installation" Removal And Installation.
3.Remove harness clips from trunk lid assembly, and then pull out harness from trunk lid assembly.
4.Remove the trunk lid hinge bolts on trunk lid side and the trunk lid assembly.

CAUTION:
Use two people when removing or installing trunk lid, due to its heavy weight.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, perform trunk lid adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustment.
- After installation, check trunk lid open/close and lock/unlock operation.
- Apply touch-up paint (body color) onto the heads of the trunk lid hinge bolts.