Without Intelligent Key System

TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation


REMOVAL

1.Remove trunk lid finisher (if equipped). Refer to "Removal and Installation" Removal And Installation.
2.Disconnect the harness connector from license plate lamp. Refer to "Removal and Installation" Removal And Installation.
3.Remove harness clips from trunk lid assembly, and then pull out harness from trunk lid assembly.
4.Remove the trunk lid hinge bolts on trunk lid side and remove the trunk lid assembly.

CAUTION:
Use two people when removing or installing trunk lid, due to its heavy weight.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, perform trunk lid adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Without Intelligent Key System.
- After installation, check trunk lid open/close, lock/unlock operation.
- Apply touch-up paint (body color) onto the heads of the trunk lid hinge bolts.