With Intelligent Key System

TRUNK LID

TORSION BAR : Removal and Installation


REMOVAL

1.Remove torsion bar clamp.
2.Support trunk lid with a suitable tool.

WARNING:
Bodily injury may occur if trunk lid is not supported properly when removing the torsion bars.





3.Apply a torsion bar wrench (A) to torsion bar (1) and lift torsion bar to remove it.
NOTE:





For torsion bar wrench, refer to the figure.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
Check trunk lid open/close operation after installation.