With Intelligent Key System

TRUNK LID

TRUNK LID STRIKER : Removal and Installation


REMOVAL

1.Remove trunk rear plate. Refer to "TRUNK REAR PLATE : Removal and Installation" Trunk Rear Plate.





2.Remove trunk lid opener cable bolt (A) and trunk lid striker bolts (B).





3.Remove trunk lid striker (1), disconnect trunk lid opener cable (2) from trunk lid striker and remove.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to "TRUNK LID ASSEMBLY : Adjustment" Adjustment.