With Intelligent Key System

TRUNK LID

TRUNK LID WEATHER-STRIP : Removal and Installation


REMOVAL

Remove trunk lid weatherstrip from the trunk lid opening.

CAUTION:
Do not pull excessively on weatherstrip.

INSTALLATION






1.Working from the upper section, align weatherstrip center mark (A) with vehicle center mark (B) and install weatherstrip onto the vehicle.
White arrow indicates: Front





2.Align the connecting point (B) of weatherstrip (2) to the center (A) of striker (1) and install as shown.
3.Make sure entire weatherstrip is firmly seated.
NOTE:
Check that weatherstrip fits tightly all around the opening, especially in each corner and along the luggage rear plate.