Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

ECM : Work Procedure


1. PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS

Refer to "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement" Special Repair Requirement.
- GO TO 2.

2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

Refer to "Work Procedure" Work Procedure.
- GO TO 3.

3. PERFORM THROTTLE VALVE CLOSED POSITION LEARNING

Refer to "Work Procedure" Work Procedure.
- GO TO 4.

4. PERFORM IDLE AIR VOLUME LEARNING

Refer to "Work Procedure" Work Procedure.
- END