Without Intelligent Key System

DOOR SWITCH

Description

Detects door open/close condition.


Component Function Check


1. CHECK FUNCTION

With CONSULT
Check door switches DOOR SW-DR, DOOR SW-AS, DOOR SW-RL, DOOR SW-RR in Data Monitor mode with CONSULT.





Is the inspection result normal?
YES- Door switch is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure

Regarding Wiring Diagram information, refer to "Wiring Diagram" Power Door Lock System.

1. CHECK DOOR SWITCH INPUT SIGNAL

1.Turn ignition switch OFF.
2.Check signal between BCM connector and ground with oscilloscope.





Is the inspection result normal?
YES- GO TO 4
NO- GO TO 2

2. CHECK DOOR SWITCH CIRCUIT

1.Disconnect BCM connector.
2.Check continuity between BCM connector and door switch connector.





3.Check continuity between BCM connector and ground.





Is the inspection result normal?
YES- GO TO 3
NO- Repair or replace harness between BCM and door switch.

3. CHECK DOOR SWITCH

Refer to "Component Inspection" .
Is the inspection result normal?
YES- GO TO 4
NO- Replace malfunctioning door switch.

4. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.


Component Inspection


1. CHECK DOOR SWITCH

1.Turn ignition switch OFF.
2.Disconnect door switch connector.
3.Check door switch.





Is the inspection result normal?
YES- Inspection End.
NO- Replace malfunctioning door switch.