Auto Door Lock Operation Does Not Operate

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK AUTO LOCK SET SETTING IN WORK SUPPORT

1.Select INTELLIGENT KEY of BCM using CONSULT.
2.Select AUTO LOCK SET in WORK SUPPORT mode.
3.Check AUTO LOCK SET setting in WORK SUPPORT.
Refer to "INTELLIGENT KEY : CONSULT Function (BCM INTELLIGENT KEY)" Intelligent Key.
Is the inspection result normal?
YES- GO TO 2.
NO- Set MODE 2, MODE 3, MODE 4, MODE 5, MODE 6 or MODE 7 in AUTO LOCK SET.

2. REPLACE BCM

1.Replace BCM. Refer to "Removal and Installation" Service and Repair.
2.Confirm the operation after replacement.
Is the result normal?
YES- Inspection End.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.