Removal and Installation - Seatback Hinge Assembly

REAR SEAT

Removal and Installation - Seatback Hinge Assembly


REMOVAL

1.Remove the seat cushion assembly. Refer to "Removal and Installation Seat Cushion Assembly" Seat Cushion Assembly.
2.Remove the rear seatback assemblies (LH/RH). Refer to "Removal and Installation 60:40 Split Seatback" 60 40 Split Seatback
3.Remove the rear seat bolsters (LH/RH). Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster
4.Remove the bolts and the seatback hinge assembly.

INSTALLATION

Installation is in the reverse order of removal.
- Tighten the seatback hinge assembly bolts to specification. Refer to "Exploded View 60:40 Split Seatback" Exploded View - 60/40 Split Seatback.