Combination Meter Buzzer

COMBINATION METER BUZZER

Component Function Check


1. CHECK FUNCTION

1.Select INTELLIGENT KEY of BCM using CONSULT.
2.Select INSIDE BUZZER in ACTIVE TEST mode.
3.Touch Key, Knob or Take Out to check that it works normally.
Is the inspection result normal?
Yes- Combination meter buzzer is OK.
No- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK METER BUZZER CIRCUIT

Refer to "Component Function Check" Meter Buzzer Circuit.
Is the inspection result normal?
Yes- GO TO 2.
No- Repair or replace harness.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.