With Intelligent Key System

HAZARD FUNCTION

Component Function Check


1. CHECK FUNCTION

1.Select INTELLIGENT KEY of BCM using CONSULT.
2.Select FLASHER in ACTIVE TEST mode.
3.Touch LH or RH to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Refer to "Component Function Check" Turn Signal Lamp Circuit.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace harness.

2. CHECK INTERMITTENT INCIDENT

Refer to "Intermittent Incident" Intermittent Incident.
- Inspection End.