P Position Warning Does Not Operate

P POSITION WARNING DOES NOT OPERATE

Diagnosis Procedure


1. CHECK DTC WITH BCM

Check that DTC is not detected with BCM
Is the inspection result normal?
YES- GO TO 2.
NO- Perform trouble diagnosis relevant to DTC indicated.

2. CHECK DTC WITH COMBINATION METER

Check that DTC is not detected with combination meter
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis relevant to DTC indicated.

3. CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to "Component Function Check" Key Warning Lamp.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK COMBINATION METER BUZZER

Check combination meter buzzer.
Refer to "Component Function Check" Combination Meter Buzzer.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK DOOR SWITCH

Check front door switch (driver side).
Refer to "Component Function Check" With Intelligent Key System.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK KEY WARNING LAMP

Check key warning lamp.
Refer to "Component Function Check" Key Warning Lamp.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. CHECK SHIFT P WARNING LAMP

Check shift P warning lamp.
Refer to "Component Function Check" Shift P Warning Lamp.
Is the inspection result normal?
YES- GO TO 8.
NO- Repair or replace the malfunctioning parts.

8. REPLACE BCM

1.Replace BCM. Refer to "Removal and Installation" Service and Repair.
2.Confirm the operation after replacement.
Is the result normal?
YES- Inspection End.
NO- Check intermittent incident. Refer to "Intermittent Incident" Intermittent Incident.