Service Notice And Precautions For TPMS

PRECAUTIONS

Service Notice and Precautions for TPMS

- Low tire pressure warning lamp blinks for 1 minute, then turns ON when occurring any malfunction except low tire pressure. Erase the self-diagnosis memories for Tire Pressure Monitoring System (TPMS), or register the ID to turn low tire pressure warning lamp OFF. For ID registration, refer to "Work Procedure" Work Procedure.
- ID registration is required when replacing or rotating wheels, replacing tire pressure sensor or BCM. Refer to
"Work Procedure" Work Procedure.
- Replace grommet seal, valve core and valve cap of tire pressure sensor in TPMS, when replacing each tire by reaching the wear limit. Refer to "Removal and Installation" Removal And Installation.
- Because the tire pressure sensor conforms to North America radio law, the following items must be observed.
- The sensor may be used only in North America.
- It may not be used in any method other than the specified method.
- It must not be disassembled or modified.