Overhaul

FRONT COMBINATION LAMP

Disassembly and Assembly


Exploded View












WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.

CAUTION:
- Disconnect the battery negative terminal or remove power circuit fuse while performing the operation.
- After installing the bulb, install cover and the bulb socket securely for watertightness.
- Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

DISASSEMBLY

1.Remove the cover.
2.Remove the retaining spring lock and bulb.
3.Rotate the parking lamp bulb socket counterclockwise and remove.
4.Remove the bulb from the parking lamp bulb socket.
5.Rotate the front turn signal lamp bulb socket counterclockwise and remove.
6.Remove the bulb from the front turn signal lamp bulb socket.

ASSEMBLY

Assembly is in the reverse order of disassembly.