Removal And Installation

FRONT COMBINATION LAMP

Removal and Installation


REMOVAL

1.Disconnect the battery negative terminal. Refer to "Removal and Installation" Removal and Replacement.
2.Remove front bumper fascia. Refer to "Removal and Installation" Removal And Installation.
3.Remove the front combination lamp bolts.
4.Pull the headlamp assembly forward slightly.
5.Disconnect the harness connectors from the front combination lamp and remove.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
After installation, perform headlamp aiming adjustment procedure. Refer to "Aiming Adjustment Procedure" Aiming Adjustment Procedure.