Both Side Headlamps (LO) Are Not Turned On

BOTH SIDE HEADLAMPS (LO) ARE NOT TURNED ON

Description

The headlamps (both sides) do not turn ON in any combination switch (lighting and turn signal switch) setting.


Diagnosis Procedure


1. COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION

Check the combination switch (lighting and turn signal switch). Refer to "Symptom Table" With Intelligent Key System (with Intelligent Key) or "Symptom Table" Without Intelligent Key System (without Intelligent Key).
Is the combination switch (lighting and turn signal switch) normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning part.

2. CHECK HEADLAMP (LO) REQUEST SIGNAL INPUT

CONSULT DATA MONITOR
1.Select HL LO REQ of IPDM E/R DATA MONITOR item.
2.While operating the combination switch (lighting and turn signal switch), check the monitor status.





Is the item status normal?
YES- GO TO 3.
NO- Replace BCM. Refer to "Removal and Installation" Service and Repair (with Intelligent Key) or "Removal and Installation" Service and Repair (without intelligent Key).

3. HEADLAMP (LO) CIRCUIT INSPECTION

Check the headlamp (LO) circuit. Refer to "HEADLAMP SYSTEM : System Description" System Description.
Is the headlamp (LO) circuit normal?
YES- Replace IPDM E/R. Refer to "Removal and Installation" IPDM E/R (With I-Key) (with Intelligent Key) or "Removal and Installation" IPDM E/R (Without I-Key) (without Intelligent Key).
NO- Repair or replace the malfunctioning part.