Map Light Bulb: Service and Repair

MAP LAMP

Bulb Replacement


WARNING:
Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.

CAUTION:
- Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

MAP LAMP BULB

Removal





1.Release lens pawls using suitable tool (A) and remove.

CAUTION:
Apply protect tape (B) on suitable tool (A).
Broken triangle indicates: Pawl
2.Remove the bulb.
Installation
Installation is in the reverse order of removal.