Exterior Lighting System

COMBINATION SWITCH

Removal and Installation


CAUTION:
- Before servicing, disconnect both battery terminals and wait at least three minutes.
- Do not use air tools or electric tools for servicing.

REMOVAL

1.Disconnect positive and negative battery terminals and wait at least three minutes.
2.Remove the steering column covers. Refer to "Removal and Installation" Service and Repair.
3.Rotate steering wheel clockwise to access first combination switch bolt then remove bolt.
4.Rotate steering wheel counter-clockwise to access second combination switch bolt.
5.Remove bolt, disconnect electrical connectors and combination switch.
6.Remove bolt combination switch.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
- In case a malfunction is detected by the air bag warning lamp, reset with the self-diagnosis function and delete the memory with CONSULT.
- If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions. Refer to "SRS Operation Check" SRS Operation Check.