Low Tire Pressure Warning Lamp

LOW TIRE PRESSURE WARNING LAMP

Component Function Check


1. CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP

Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.
Is the inspection result normal?
YES- Inspection End.
NO- Perform trouble diagnosis. Refer to "Diagnosis Procedure" .


Diagnosis Procedure


1. PERFORM SELF DIAGNOSTIC RESULT

With CONSULT
1.Turn the ignition switch ON.
2.Perform "SELF DIAGNOSTIC RESULT".
Are any DTCs detected?
YES- Refer to "DTC Index" Testing and Inspection or "DTC Index" Testing and Inspection.
NO- GO TO 3.

2. CHECK LOW TIRE PRESSURE WARNING LAMP SIGNAL

With CONSULT
1.Turn the ignition switch ON.
2.On "DATA MONITOR" select "WARNING LAMP."
3.Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.
Is the inspection result normal?
YES- Check the combination meter. Refer to "CONSULT Function" Type A (type A) or "CONSULT Function" Type B (type B).
NO- Replace the BCM. Refer to "Removal and Installation" Service and Repair or "Removal and Installation" Service and Repair.