Low Tire Pressure Warning Lamp Blinks

LOW TIRE PRESSURE WARNING LAMP BLINKS

Diagnosis Procedure

NOTE:
If low tire pressure warning lamp repeats blinking ON for 2 seconds and OFF for 0.2 seconds, wake-up operation for all transmitters is not complete.
Carry out transmitter wake-up operation. Refer to "Work Procedure" Work Procedure.

1. CHECK BCM CONNECTOR

1.Turn ignition switch OFF.
2.Disconnect BCM connectors.
3.Check terminals for damage or loose connections.
Is the inspection result normal?
YES- Replace BCM. Refer to "Removal and Installation" Service and Repair or "Removal and Installation" Service and Repair.
NO- Repair or replace damaged parts.