Removal And Installation

ECM

Removal and Installation


REMOVAL

1.Remove battery. Refer to "Removal and Installation" Removal and Replacement.
2.Remove IPDM E/R. Refer to "Removal and Installation" IPDM E/R (Without I-Key).





3.Remove IPDM E/R cover (1).





4.Disconnect ECM harness connectors.
5.Remove ECM mounting nuts.
6.Remove ECM from ECM bracket.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Must be perform additional service when replacing ECM. Refer to "Work Procedure" Work Procedure.